NDC comm NWH660 Manual de usuario descargar pdf (Pagina 50)

50 InstantWave

11-Mbps Wireless Access Point

Figure 32. New/Edit Address

Two levels of access may be assigned:

Read Read-only rights. The user may read everything

except the Access Control settings, but is not

allowed to alter anything

Read/Write The user may read and alter all settings

Enter your PC’s IP address and then set your own access rights to Read/Write (see

the following note).

Note: Do not set all the stations in the Access Control table to Read only. Once this is

set and enabled, it will be impossible to modify the NWH660. Should this

situation occur, press the Reset button on the rear of the NWH660 to restore

the factory configuration.

To set a stations access rights, enter a station’s IP address and password (the

community string is used as a password to access the NWH660) and choose Read or

Read/Write.

When a setting is made, click OK. Repeat the procedure for the next PC. When all

settings are made, click OK in the configuration dialog boxto make the changes

effective.

Trap Server

When the NWH660 is powered on, or an Ethernet port becomes active, an event log

will be generated indicating the time, the IP address of the reporting NWH660, and

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 74 75

Sin comentarios

NDC comm NWH660 Manual de usuario Pagina 50